#I323
 |
Bell&Howell VIP 1000, 4 station Mailstar 1000 with GBR 438 sheet
feeder folder, OMR, Turnover and conveyor, Only 3.8 Mill.
cycles, under full maintenance by Bell&Howell, operating in a
small community bank usage was about 40,000 pieces per month.
Unit is in excellent condition, 90 day warranty on
non-consumable parts.
Price: $48,000.00 |
#I319
 |
Bell&Howell Mastermailer III, 9x12 Intelligent 6
station system with MBO folder, GBR 420T sheet feeder,
has a flats accumulator, and folded sheet accumulate and
stitcher, Cameras read 2D, 3/9, 2/5 and OMR code. 1994
unit in good working order under full BH maintenance,
only 4.2 million cycles.
Price: $39,000.00
|
#I313
 |
Bowe Bell & Howell 2005 Enduro 6 station inserter,
with Hi Cap sheet feeder 3 of 9 BCR, in very good condition,
was on continuous BBH maintenance schedule .
|
#I258
 |
Pitney Bowes 8 Series 6 station high cap sheet feeder,
direct connect, OMR, 2001 unit, only 1.5 mil cycles, used in
government facility and is in excellent condition. Approved
for Pitney Bowes service. No pre-existing conditions.
Price: $26,500.00.
|
#I203
 |
Six available, Pitney Bowes 8 series, continuous forms dual
cutters input, 8 stations, DC software. Call for additional
information. |
#I164
 |
Reconditioned GBR 420. OMR reading and page count control,
can be run stand-alone or in-line with gripper inserter.
Sixty days warranty on parts.
|
SOLD
#I265
 |
Bell & Howell Jet Vision Platinum verification system, in
excellent condition. Customer will need to renew software
license agreement with Bowe Bell & Howell.
|
SOLD
#I262
 |
Bell &
Howell 6 station Mailstar 500, 6 station AIM system, with
High Cap GBR sheet feeder, AUI, 4 plate Baum folder, OMR,
1995, in good working order, was under full service
contract. 90 day parts warranty.
|
SOLD
#I246

|
Hard to find Bowe Bell & Howell VIP 2000
with GBR hi cap 438 sheet feeder folder, OMR, 6-ft. conveyor, is
in excellent condition, low usage, 2003, BCR or 2D reading can
be added. 90 day parts warranty. |
SOLD
#I206
 |
Bell & Howell AIM System, 6 station MS-400/Top Sheet
Feeder/MBO Folder, OMR, was under full BH Service, Good
condition. 1997, recently de-installed. Does not include
Postage Meter.
|
SOLD
#I190
 |
Bell & Howell
6 station VIP 1000 turnover. GBR 420T sheet feeder/folder,
OMR reader. 2001, in excellent condition, low usage - only
1900 hours.
|
SOLD
#I186
 |
Reconditioned Bell & Howell 8 station VIP with model
Mailstar 775 turnover base, GBR 420 high cap top sheet
feeder with OMR, High Capacity on edge conveyor in excellent
condition. Year 1997.
60 day parts warranty less labor.
Call for price.
Check for our on line lease with option to purchase
cost.
|
SOLD
#I182
 |
Mailcrafters Thor System, 2001, low volume, excellent
condition, 6 station 9800 Edge Base with 438 GBR sheet
feeder folder. OMR Reader. BCR can be added.
|
SOLD
#I169
 |
Pitney Bowes APS Inserting System, Model
Y560, year 2003, 2-up continuous system, 4 diverters, OMR, 97.5
million cycles, alpha 3 accumulator, very good condition, under
continuous Pitney Bowes services. |
SOLD
#I165
 |
Reconditioned Bell & Howell high speed
Pinnacle (2000) 6 station turnover with VIP extension for adding
a GBR 438 or 420 for in line processing. Sixty days parts
warranty. |
SOLD #I147
 |
Bell & Howell Model Mailstar 400/775, 6
station, turnover with MBO folder, GBR 420 sheet feeder, 1996,
AUI, OMR, BCR, very good condition. Call for pricing. |
#A320

|
Mailcrafter MOD 4, 4 station
inserter, reconditioned stacker model, in excellent
condition, ideal for medium volume applications, up to 5 1/2
X 8 1/5 inserts. 90 day parts warranty.
Price:
$5500.00
|
#A318
 |
Reconditioned Bell & Howell 775 8 station
inserting maching with turnover, 6 foot conveyor, very good condition, mid 1997,
priced like a 6 station inserter. 90 day parts warranty.
Price: $14,500.00
|
#A207
 |
Bell & Howell high speed Pinnacle, 6 station with
turnover and 6 foot conveyor. 1998, only 1900 hours, in
excellent condition. 90 day parts warranty.
Price: $18,900.00
|
#A179
 |
Reconditioned Bell & Howell Imperial
10,000, 6 Station Stacker model, electronic 4-1 detection. In
excellent condition. 90 day parts warranty.
Price: $8,900.00
Lease/Purchase available. |
#A269
 |
Reconditioned Bell & Howell model Mailstar 400/775, 1996,
6 stations with turnover, ejector rollers, and 6 foot
conveyor. Unit is in excellent condition, 90 days parts
warranty.
Units like this are available on an ongoing basis.
|
#A266
 |
Rebuilt 20 station Bell & Howell Model 10,000, in
excellent condition, Turnover and 6 foot conveyor. 90 parts
warranty.
Price: $24,000.00
|
SOLD
#A312
 |
Bell & Howell Model 5000, 4 station stacker, cleaned
up, checked out for missing and worn parts, not repainted, a
good running machine for medium volume jobs. Will run at
4000 per hour on most jobs. Need only 115 volts. 60 day
parts warranty.
|
SOLD
#A273
 |
Reconditioned Mailcrafters model LBI 98-6PM, 6 station
turnover, 2005, in excellent condition, 4 units available.
Great letter shop work horse. 90 day parts warranty.
|
SOLD
#A211
 |
Reconditioned Bell & Howell, late 80s, 4 station turnover
model with 6 foot conveyor, electronic detection, DC drive,
ejector rollers.
In excellent condition. 90 day parts warranty.
Price: $ 7,500.00
|
SOLD
#A201
 |
Mailcrafters, 2006 like new, 6 station Edge series, turnover and
conveyor.
|
SOLD
#A196
 |
Bell &
Howell Model Mailstar 775, 6 Station Stacker Model. Very low
usage, excellent condition, mid 90's. 90 day parts warranty.
|
SOLD
#A180
 |
Reconditioned
Bell & Howell Mailstar 775, 4 station turnover, with open feed
extension for GBR sheet feeder folder input, or as a booklet
feeder; in pristine condition. 90 days parts warranty.
|
SOLD
#A175
 |
Bell & Howell
reconditioned Model 10,000, 6 stations with DC Drive, turnover.
90 day parts warranty. Great value.
|
SOLD #A157
 |
Choppers - 12
station gripper arm machines with in-line Rossbach choppers,
heavy duty throughout, 2 units available. 90 day parts
warranty.
|
#D322
 |
Bell & Howell 6 station
Mastermailer lll, 1994, only 4.2 million cycles. was
under continuous BH maintenace in a small Insurance Co.
90 day parts warranty.
Price: $ 24,900.00
|
#D324
 |
Reconditioned 6 Station Bell&Howell Mastermailer ll, 1999,
in very good conditioned with turnover and 6 foot variable
speed conveyor. 90 days parts warranty, based on one shift
operation.
Price: $14,500.00
|
#D321
 |
Reconditioned Bell&Howell 4 Station Mastermailer II, with
turnover and 6 foot conveyor in excellent condition, year
1990, 90 day parts warranty.
Price: $14,500.00
|
#D204
 |
Pitney Bowes Model 3139 4 station 9x12 with in-line
folding unit, very good condition, only 3.9 million cycles.
Unit was under service with Pitney Bowes. 90 day parts
warranty.
Price: $5,500.00
|
#D124
 |
Two available.
Bell & Howell 9x12 1998 Mailstar 776 6-station trailer
sections in excellent condition.
$7000.00 each.
|
SOLD
#D295
 |
Bell & Howell
9x12 8 station Mastermailer with turnover and 6 ft. conveyor, in
very good condition, late 80's.
|
SOLD
#D195
 |
Bell & Howell Mastermailer ll, 4 Station conveyor
delivery model with 6 foot conveyor, very low usage machine,
under Bell & Howell service; used once per month in a
Brokerage Firm. 90 day parts warranty.
|
SOLD
#D193
 |
Mailcrafters Model 1200 Edge Series 9x12, 6 Stations with
turnover and conveyor, in-line with intelligent GBR 438 sheet
feeder, no folder. Year 2004, like new condition. |
SOLD
#D166
 |
Bell & Howell
Jumbo (10x13) 4 station inserter with booklet feeder. Very
good condition. 90 days on parts.
|
SOLD
#D149
 |
Hard to find Mailcrafters Edge Model 1200X, 10x14, 12 station
with turnover, open feed station and Surefeed friction feeder,
2003 model, less than 200 hours of run time, excellent
condition. Call for price on this unit. |
SOLD
#D257
 |
Reconditioned Bell & Howell Mailstar 776, 6 station
Mastermailer with booklet feeder, turnover, 6 foot conveyor,
ejector roller, 1994, only 2300 hours, in very good condition.
90 day parts warranty. |
#F272
 |
Baumfolder/Nordson DuraBlue professional spot gluing
system(2004), consisting of Baumfolder model 2015 heavy duty
4 plate folder, pile feeder, grooved segmented rubber/steel
rollers. Nordson DuraBlue Hot melt adhesive automatic
gluers introduced in 2003 are considered the best state of
the art digital controlled hot melt gluers on the market.
Replacement value of this system is $39,500.00. This
equipment was in used in a low volume operation and is in
excellent condition, 90 days parts warranty.
Price: $19,500.00
|
#F28
 |
Baumfolder Model 714
Airfeed Heavy duty Table Top Model. Good Condition. |
SOLD
#F267
 |
MBO Knife Folder, less than 100 thousands pieces, in like
new condition. 5 years old. 90 parts warranty.
|
SOLD
#F263
 |
Baum Legend Model 44, pile feeder, combo rollers, Baum
set, 1990, very good condition. 90 day one shift parts
warranty. |
SOLD
#F260
 |
Stahl model B120 folder with right angle. In excellent
condition, 60 day parts warranty. |
SOLD
#F108
 |
MBO Folder
Model B118-4 parallel section, 2-1/2 years old, low usage, in
excellent condition.
|
#J317
 |
Secap ink jet system. |
#J296
 |
Video Jet Model 7000 vacuum base, in very good condition.
Call for pricing. |
#J270
 |
Scitex model 5240, Network SP Package, Kirk Rudy 215V
with extended base, Research dryer, 12 foot conveyor, low
usage units, in excellent condition, 12 foot conveyor, 90
day parts warranty.
Call for pricing.
|
#J261
 |
Buskro Atlas inkjet system, 2005 model , with IMB
capability. Running Windows XP. Three 1" Atlas
print heads, and one HP head for spot color. This unit
can print at more than twice the speed of a cartridge based
inkjet with an ink savings of 75%. Ink is pumped to
the print heads from a reservoir. System includes
Streamfeeder, transport base, and 12' conveyor. 90 day
warranty.
Call for pricing.
|
#J259
 |
Kirk Rudy Wink Jet with 3" HP print, Dryer, 12 Foot
conveyor, Model 215 shuttle feeder, Air Vacuum Base, 2003,
in excellent condition, 90 day parts warranty.
Call for special price.
|
SOLD
#J316

Brochure

Movie
|
Rena XP - New in the box.
Outstanding performance at an affordable
price! The 133 MHz Motorola designed processor and 64 MB
of RAM that power the new Envelope Imager 2XP handles your
graphics and variable data with lightning fast speed to maximize
your productivity. The USB interface is designed for
today's PCs. |
#O298
 |
Pitney Bowes model 1224 high speed letter
opener, up to 250 envelopes per minute.
Handles a variety of dimensions and
thicknesses. Has large envelope
stacker, large capacity chip container, in
excellent condition.
Price: $650.00.
|
#O297
 |
Rebuilt Streamfeeder model V-710, for feeding Ink
Jet Addressing systems, folders, Mastermailers and other
9x12 gripper arm inserters.
Price: $1750.00
|
|
#O199
|
Postmatic model 600 stamp affixer with Pitney Bowes model
R-150 base in very good condition, was also in a low volume
environment.
Price: $3,500.00
|
|
#O72
|
High speed printers and forms handling
equipment. Please call for information and availability. |
#O63
 |
Aggissar
triple cut auto envelope opening and extracting machine like new
available, up to 3000 per hour, handles envelopes from 3-1/2" x
5-1/4" to 4-7/8" x 9-1/2".
Price:
$9,500.00
|
|
#O50
|
Reconditioned
Streamfeeder. Subject to availability.
$1050.00
|
SOLD
#O200
 |
Postmatic Model 7000 Stamp Affixer with Hasler meter
base in very good condition. Came out a of low volume
environment.
|
| #P274 |
Kirk Rudy 527
Tabber. New belts and roller.
|
| #P275 |
Opex MPS 40 mail sorter. |
| #P276 |
MCS 190 very good condition. |
| #P277 |
Pitney Bowes R750 digital meters,
Infinity. |
| #P278 |
Scitex 6240 with 400 or 200 controller, 8
print heads |
| #P279 |
Reconditioned Buskro 530 tabbers. |
| #P280 |
Reconditioned FP Maximailer |
| #P282 |
Refurbished Roll Systems unwinder U5 high
speed. |
| #P283 |
Oce 510 printer |
| #P284 |
PFE Automailer 5 |
| #P285 |
Pitney Bowes DM500 |
| #P286 |
Doboy 8 station PolyWrap, mid 90's. Good
shape. |
| #P287 |
Kern 2500 sheet fed, 2003 |
| #P288 |
Research dryers (2) DRI-5060 |
| #P289 |
Pitney Bowes DM1000 |
| #P290 |
Pitney Bowes DM800 |
| #P291 |
Moore 4180 pressure sealer |
| #P292 |
1999 Buhrs BB300 8 station |
| #P293 |
VideoJet 7000 vacuum base |
| #P294 |
Oce 5160 cut sheet printer |
| #P299 |
Signode LB2000 Tiers |
| #P300 |
Duplo 4000, Twin Towers,10 bins each |
| #P301 |
Rena XPS-80 Ink Jet Printer |
| #P302 |
Pitney Bowes DM500 |
| #P303 |
Kirk Rudy Pick & Place - credit cards |
| #P304 |
Kirk Rudy Plow Fold Unit - Right & Left |
| #P305 |
NPI Flat V-Sort 60 bins |
| #P306 |
BBH Criterion 256 bins, IMB |
| #P307 |
PTI 100 bin sorter RAF, Smart Match |
| #P308 |
OCE 5160 cut sheet printer |
| #P309 |
(2) CMC 250 S Inserters, no intelligence,
high speed lettershop machines, only one million cycles. |
| #P310 |
IBM 4150 InfoPrint HD6 RSI 500 FPM pre and
post |
| #P311 |
2005 Kern 3500, sheet fed #970, OMR, 2
station, with Lake camera |
| #P314 |
Hot foil stamp machines, "Markem LP-375" one
4x6 and 4x4. |
| #P315 |
Kirk Rudy Pick and Place System, set up to
do credit cards and other applications. |